Luchtbuks.net: Luchtbuks.net - Hét forum en informatiebron voor luchtschietend Nederland

Ga naar inhoud

Pagina 1 van 1
  • Je kunt geen nieuwe topic starten
  • Je kunt niet antwoorden op deze topic

Hatsan M25 Supercharger Setup

#1 Gebruiker is offline   Alan99 Icoon

  • Gebruiker
  • Pip
  • Groep: Members
  • Posts: 4
  • Lid geworden: 16-mei 20
  • Location:Den haag

Gepost 17 mei 2020 - 14:15

Hi,

I recently purchased a Hatsan m25 supercharger air pistol, but when I got it the quattro trigger system was not setup and the gun could not fire or load.
After a week of trial and error I got it to load, but the trigger was too light and it was firing randomly.
I am trying to adjust it again, and again I cannot load it.
The trigger system has only 2 screws, but every tutorial I see talks about a system that uses 3 screws. According to the shop I got it from this is the same system.
So my first question would be, what is stopping the gun from loading?
I crack the barrel, and pull it fully down, but the spring system is not catching.
I have tried adjusting the 2 screws up and down, but I don't understand what is stopping the loading.
I have attached some pictures, maybe somebody can spot something.
Apologies for writing in English, and if this is a stupid question I apologies also.
I thought it would be easy, I didn't expect this much work and stress :(

Any help or advice is greatly appreciated,
Also if anybody works on these anywhere in North/Zuid holland I would be happy to pay to have it setup.

Bijgesloten miniatuur

  • Bijgesloten Plaatje
  • Bijgesloten Plaatje
  • Bijgesloten Plaatje


#2 Gebruiker is offline   yana Icoon

  • Pro
  • Pip Pip Pip Pip Pip Pip Pip Pip
  • Groep: Experts
  • Posts: 17081
  • Lid geworden: 30-september 03
  • Location:onder rotterdam

Gepost 18 mei 2020 - 07:10

It should have the quattro trigger just like almost all Hatsans. Theyre all the same.
Allthough they usually are goldcolored yours is black. May not be original.
The 3rd screw should be there. Its just not logically placed:
https://www.airgunde...er-adjustments/


Maybe something is broken (sear spring), also a possibility

Deze post is bewerkt door yana: 18 mei 2020 - 07:20


#3 Gebruiker is offline   Alan99 Icoon

  • Gebruiker
  • Pip
  • Groep: Members
  • Posts: 4
  • Lid geworden: 16-mei 20
  • Location:Den haag

Gepost 18 mei 2020 - 15:27

Bekijk Post yana, op 18 mei 2020 - 07:10, zei:

It should have the quattro trigger just like almost all Hatsans. Theyre all the same.
Allthough they usually are goldcolored yours is black. May not be original.
The 3rd screw should be there. Its just not logically placed:
https://www.airgunde...er-adjustments/


Maybe something is broken (sear spring), also a possibility


Hi, thanks for the reply.
I have checked over it a few times and asked the store where I bought it, they say the 2 screw trigger should behave the same way.
Yes, I have noticed every model I look up seems to have the golden trigger and 3rd screw, mine is something else.
I bought it online, so it looks like they might have sold me some kind of display model or second hand one they had in the shop.
I have tried a lot of different sites and I cant get any info on it, so looks like I'm stuck with a broken gun.
I think the lesson here is to be extremely careful ordering these online, because if it doesn't work its your loss.
If I do make any progress with it I will update this thread, but looks like I got ripped on this one :(

#4 Gebruiker is offline   Dennis74 Icoon

  • Schutter 2e klas
  • Pip Pip Pip Pip Pip
  • Groep: Serious Members
  • Posts: 406
  • Lid geworden: 12-januari 18
  • Location:'t Gooi

Gepost 18 mei 2020 - 20:54

I am no Hatsan expert, but I think you should be able to get something alike for your model? Took me a minute to find this one.

Geposte afbeelding

https://www.top-impa...m-hatsan-mod-25

#5 Gebruiker is offline   Alan99 Icoon

  • Gebruiker
  • Pip
  • Groep: Members
  • Posts: 4
  • Lid geworden: 16-mei 20
  • Location:Den haag

Gepost 20 mei 2020 - 14:38

Bekijk Post Dennis74, op 18 mei 2020 - 20:54, zei:

I am no Hatsan expert, but I think you should be able to get something alike for your model? Took me a minute to find this one.

Geposte afbeelding

https://www.top-impa...m-hatsan-mod-25


Ohh! Very nice, I didn't think it would actually be possible to buy that separately.
Its going to be a challenge to switch, but I have to try something!!!
Thanks for the link! Will let you know how it goes. :)

#6 Gebruiker is offline   BenPlinker Icoon

  • Schutter lange afstand+
  • Pip Pip Pip Pip
  • Groep: Serious Members
  • Posts: 130
  • Lid geworden: 13-januari 13
  • Location:Wolvega

Gepost 20 mei 2020 - 18:10

It looks like a Hatsan mod 25, with supercharger marks on it.

#7 Gebruiker is offline   Alan99 Icoon

  • Gebruiker
  • Pip
  • Groep: Members
  • Posts: 4
  • Lid geworden: 16-mei 20
  • Location:Den haag

Gepost 22 mei 2020 - 15:24

Bekijk Post BenPlinker, op 20 mei 2020 - 18:10, zei:

It looks like a Hatsan mod 25, with supercharger marks on it.


Got a bad feeling you could be correct, some kind of second hand / display model.
Be very careful buying online.
At this stage I will be happy if i can just get it to work.

Pagina 1 van 1
  • Je kunt geen nieuwe topic starten
  • Je kunt niet antwoorden op deze topic

1 Gebruiker(s) lezen dit topic
0 gebruikers, 1 gasten, 0 anonieme gebruikers